Product Description:
- 6203 ZZ Deep Groove Ball Bearing: It is made of 100% Chrome Steel and Pre-Lubricated with High-Quality Grease, ideal for use in High—and Low-temperature settings.
- This deep groove ball bearing has a shield on both sides, to protect the bearing from dust or contamination.
- Application: Motorcycles, Snowmobiles, Snowblowers, Snow Thrower, Lawn Mowers, Automotive, Appliances, Sporting Machines, Agriculture Machines, Industrial Applications, Electric Motors, HVAC, Furnaces, Transmissions, Gearboxes, Elevators, Lifts and Hoists, Medical Devices...etc
- Specializing in the Exclusive Production of Bearings with High Performance, High Speed, Less Vibration, Low Noise, and Long Life.
62 Series Bearings Parameters
| Basic Bearing
No. | Bore d | Outer Diameter D | Width W | Radius r | Basic Load Rating KN | Maximum Run out Speed | Weight
kg/pc |
| mm | inch | mm | inch | mm | inch | mm | inch | Dynamic | Static | Grease | Oil |
| C | CO | r/min | r/min |
| 627 | 7 | 0.2756 | 22 | 0.8661 | 7 | 0.2756 | 0.3 | 0.012 | 3.35 | 1.4 | 26000 | 34000 | 0.013 |
| 628 | 8 | 0.3149 | 24 | 0.9448 | 8 | 0.3149 | 0.3 | 0.012 | 4 | 1.59 | 24000 | 32000 | 0.017 |
| 629 | 9 | 0.3543 | 26 | 1.0236 | 8 | 0.3149 | 0.3 | 0.012 | 4.55 | 1.96 | 22000 | 30000 | 0.02 |
| 6200 | 10 | 0.3937 | 30 | 1.1811 | 9 | 0.3543 | 0.6 | 0.024 | 5.1 | 2.39 | 19000 | 26000 | 0.032 |
| 6201 | 12 | 0.4724 | 32 | 1.2598 | 10 | 0.3937 | 0.6 | 0.024 | 6.1 | 2.75 | 18000 | 24000 | 0.037 |
| 6202 | 15 | 0.5906 | 35 | 1.3780 | 11 | 0.4331 | 0.6 | 0.024 | 7.75 | 3.6 | 17000 | 22000 | 0.045 |
| 6203 | 17 | 0.6693 | 40 | 1.5748 | 12 | 0.4724 | 0.6 | 0.024 | 9.6 | 4.6 | 16000 | 20000 | 0.066 |
| 6204 | 20 | 0.7874 | 47 | 1.8504 | 14 | 0.5512 | 1.0 | 0.039 | 12.8 | 6.65 | 14000 | 18000 | 0.106 |
| 6205 | 25 | 0.9843 | 52 | 2.0470 | 15 | 0.5906 | 1.0 | 0.039 | 14 | 7.85 | 12000 | 16000 | 0.128 |
| 6206 | 30 | 1.1811 | 62 | 2.4409 | 16 | 0.6299 | 1.0 | 0.039 | 19.5 | 11.3 | 10000 | 13000 | 0.199 |
| 6207 | 35 | 1.3780 | 72 | 2.8346 | 17 | 0.6693 | 1.1 | 0.043 | 25.7 | 15.3 | 8800 | 10000 | 0.287 |
| 6208 | 40 | 1.5748 | 80 | 3.1496 | 18 | 0.7087 | 1.1 | 0.043 | 29.1 | 17.8 | 7700 | 9200 | 0.367 |
| 6209 | 45 | 1.7717 | 85 | 3.3465 | 19 | 0.7480 | 1.1 | 0.043 | 32.5 | 20.4 | 6800 | 8200 | 0.416 |
| 6210 | 50 | 1.9685 | 90 | 3.5433 | 20 | 0.7874 | 1.1 | 0.043 | 35 | 23.2 | 6100 | 7300 | 0.462 |
| 6211 | 55 | 2.1654 | 100 | 3.9370 | 21 | 0.8268 | 1.5 | 0.059 | 43.5 | 29.2 | 5500 | 6600 | 0.602 |
| 6212 | 60 | 2.3622 | 110 | 4.3307 | 22 | 0.8661 | 1.5 | 0.059 | 52.5 | 36 | 5000 | 6000 | 0.789 |
| 6213 | 65 | 2.5591 | 120 | 4.7244 | 23 | 0.9055 | 1.5 | 0.059 | 58.5 | 40.5 | 4800 | 5800 | 0.99 |
| 6214 | 70 | 2.7559 | 125 | 4.9213 | 24 | 0.9449 | 1.5 | 0.059 | 63.7 | 45 | 4600 | 5600 | 1.1 |
| 6215 | 75 | 2.9528 | 130 | 5.1181 | 25 | 0.9843 | 1.5 | 0.059 | 68.9 | 49 | 4400 | 5400 | 1.2 |
Applications:
Applicable to all kinds of cars, motorcycles, bikes, sports equipment, agriculture machines.
Customization:
Product Customization Services for the 6200 Series Bearing:
Brand Name: BUGAO/NBKT
Model Number: 6200, 6201, 6202, 6203, 6204, 6205, 6206, 6207, 6208, 6209, 6210
Place Of Origin: Ningbo, China
Customization: Customization Welcomed
Stock: Rich
Bearing Type: Single Row Deep Groove Ball
Bearing Material: Chrome Steel, Stainless Steel, Etc
Series: 6200 Ball Bearing
Keywords: Rubber Sealed Bearing, Air Conditioner Bearing, Motorcycle Bearing
Packing and Shipping:
Product Packaging and Shipping for the 6200 Series Bearing:
The 6200 Series Bearing is carefully packaged to ensure its safe delivery to you.
For shipping, we use reliable carriers to deliver your order in a timely manner. Your package will be tracked and insured for added peace of mind.
Other Technical Data of Ball Bearings
ABEC-1 Tolerance Class ABEC-1 (P0)
| Inner Ring | Tolerance in um/s |
| d mm | Δdmp | 9 | Vdp²)0,1 Diameter Series | 2,3,4 | Vdmp | Kia | ΔBs | Vbs |
| over | including | high | low | max | max | max | high | low | max |
| 1)0.6 | 2.5 | 0 | -8 | 10 | 8 | 6 | 6 | 10 | 0 | -40 | 12 |
| 2.5 | 10 | 0 | -8 | 10 | 8 | 6 | 6 | 10 | 0 | -120 | 15 |
| 10 | 18 | 0 | -8 | 10 | 8 | 6 | 6 | 10 | 0 | -120 | 20 |
| 18 | 30 | 0 | -10 | 13 | 10 | 8 | 8 | 13 | 0 | -120 | 20 |
| 30 | 50 | 0 | -12 | 15 | 12 | 9 | 9 | 15 | 0 | -120 | 20 |
| 50 | 80 | 0 | -15 | 19 | 19 | 11 | 11 | 20 | 0 | -150 | 25 |
| Outer Ring | Tolerance in um/s |
| D mm | Δdmp | VDp2)4)Open Bearings Diameter Series | Capped Bearings2)3) | Vdmp | Kia | ΔBs | Vbs |
| 9 | 0,1 | 2,3,4 | 2,3,4 |
| over | including | high | low | max | max | max | high | low | max |
| 1)2.5 | 6 | 0 | -8 | 10 | 8 | 6 | 10 | 6 | 15 | Identical to ΔBs and VBs of inner ring of same bearing |
| 6 | 18 | 0 | -8 | 10 | 8 | 6 | 10 | 6 | 15 |
| 18 | 30 | 0 | -9 | 12 | 9 | 7 | 12 | 7 | 15 |
| 30 | 50 | 0 | -11 | 14 | 11 | 8 | 16 | 8 | 20 |
| 50 | 80 | 0 | -13 | 16 | 13 | 10 | 20 | 10 | 25 |
| 80 | 120 | 0 | -15 | 19 | 19 | 11 | 26 | 11 | 35 |
| 120 | 150 | 0 | -18 | 23 | 23 | 14 | 30 | 14 | 40 |
ABEC-3 Tolerance Class ABEC-3 (P6)
| Inner Ring | Tolerance in um/s |
| d mm | Δdmp | 9 | Vdp²)0,1 Diameter Series | 2,3,4 | Vdmp | Kia | ΔBs | Vbs |
| over | including | high | low | max | max | max | high | low | max |
| 11)0.6 | 2.5 | 0 | -7 | 9 | 7 | 5 | 5 | 5 | 0 | -40 | 12 |
| 2.5 | 10 | 0 | -7 | 9 | 7 | 5 | 5 | 6 | 0 | -120 | 15 |
| 10 | 18 | 0 | -7 | 9 | 7 | 5 | 5 | 7 | 0 | -120 | 20 |
| 18 | 30 | 0 | -8 | 10 | 8 | 6 | 6 | 8 | 0 | -120 | 20 |
| 30 | 50 | 0 | -10 | 13 | 10 | 8 | 8 | 10 | 0 | -120 | 20 |
| 50 | 80 | 0 | -12 | 15 | 15 | 9 | 9 | 10 | 0 | -150 | 25 |
| Outer Ring | Tolerance in um/s |
| D mm | Δdmp | VDp2)4)Open Bearings Diameter Series | Capped Bearings2)3) | Vdmp | Kia | ΔBs | Vbs |
| 9 | 0,1 | 2,3,4 | 2,3,4 |
| over | including | high | low | max | max | max | high | low | max |
| 1)2.5 | 6 | 0 | -7 | 9 | 7 | 5 | 9 | 5 | 8 | Identical to ΔBs and VBs of inner ring of same bearing |
| 6 | 18 | 0 | -7 | 9 | 7 | 5 | 9 | 5 | 8 |
| 18 | 30 | 0 | -8 | 10 | 8 | 6 | 10 | 6 | 9 |
| 30 | 50 | 0 | -9 | 11 | 9 | 7 | 13 | 7 | 10 |
| 50 | 80 | 0 | -11 | 14 | 11 | 8 | 16 | 8 | 13 |
| 80 | 120 | 0 | -13 | 16 | 16 | 10 | 20 | 10 | 18 |
| 120 | 150 | 0 | -15 | 19 | 19 | 11 | 25 | 11 | 20 |
ABEC-5 Tolerance Class ABEC-5 (P5)
| Inner Ring | Tolerance in um/s |
| d mm | Δdmp | Vdp²)Diameter Series | Vdmp | Kia | Sd | Sis3) | ΔBs | Vbs |
| 9 | 0,1,2,3,4 |
| over | including | high | low | max | 3 | max | max | max | High | Low | max |
| 1)0.6 | 2.5 | 0 | -5 | 5 | 4 | 3 | 4 | 7 | 7 | 0 | -40 | 5 |
| 2.5 | 10 | 0 | -5 | 5 | 4 | 3 | 4 | 7 | 7 | 0 | -40 | 5 |
| 10 | 18 | 0 | -5 | 5 | 4 | 3 | 4 | 7 | 7 | 0 | -80 | 5 |
| 18 | 30 | 0 | -6 | 6 | 5 | 3 | 4 | 8 | 8 | 0 | -120 | 5 |
| 30 | 50 | 0 | -8 | 8 | 6 | 4 | 5 | 8 | 8 | 0 | -120 | 5 |
| 50 | 80 | 0 | -9 | 9 | 7 | 5 | 5 | 8 | 8 | 0 | -150 | 6 |
| Outer Ring | Tolerance in um/s |
| D mm | Δdmp | Vdp²)Diameter Series | Vdmp | Kia | SD4) SD15) | Sea4)5) | ΔBs | Vbs |
| 9 | 0,1,2,3,4 |
| over | including | high | low | max | | max | max | max | High | Low | max |
| 1)2.5 | 6 | 0 | -5 | 5 | 4 | 3 | 5 | 8 | 8 | | 5 |
| 6 | 18 | 0 | -5 | 5 | 4 | 3 | 5 | 8 | 8 | 5 |
| 18 | 30 | 0 | -6 | 6 | 5 | 3 | 6 | 8 | 8 | 5 |
| 30 | 50 | 0 | -7 | 7 | 5 | 4 | 7 | 8 | 8 | 5 |
| 50 | 80 | 0 | -9 | 9 | 7 | 5 | 8 | 8 | 10 | 6 |
| 80 | 120 | 0 | -10 | 10 | 8 | 5 | 10 | 9 | 11 | 8 |
| 120 | 150 | 0 | -11 | 11 | 8 | 6 | 11 | 10 | 13 | 8 |
ABEC-7 Tolerance Class ABEC-7 (P4)
| Inner Ring | Tolerance in um/s |
| d mm | Δdmp | Δds | Vdp²)Diameter Series | Vdmp | Kia | Sd | Sia | ΔBs | Vbs |
| 7,8,9 | 1,7,2,3,4 |
| over | including | high | low | high | low | max | max | max | max | max | High | low | Low | max |
| 1)0.6 | 2.5 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 2.5 | 3 | 3 | 0 | -40 | -40 | 2.5 |
| 2.5 | 10 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 2.5 | 3 | 3 | 0 | -40 | -40 | 2.5 |
| 10 | 18 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 2.5 | 3 | 3 | 0 | -80 | -80 | 2.5 |
| 18 | 30 | 0 | -5 | 0 | -5 | 5 | 4 | 2.5 | 3 | 4 | 4 | 0 | -120 | -120 | 2.5 |
| 30 | 50 | 0 | -6 | 0 | -5 | 6 | 4 | 3 | 4 | 4 | 4 | 0 | -120 | -120 | 3 |
| 50 | 80 | 0 | -7 | 0 | -5 | 7 | 5 | 3.5 | 4 | 5 | 5 | 0 | -150 | -150 | 4 |
| Outer Ring | Tolerance in um/s |
| D mm | Δdmp | Δds | Vdp²)Diameter Series | Vdmp | Kia | Sd | Sia | ΔBs | Vbs |
| 7,8,9 | 1,7,2,3,4 |
| over | including | high | low | high | low | max | max | max | max | max | High | low | max |
| 1)2.5 | 6 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 3 | 4 | 5 | Identical to ΔBs and VBs of inner ring of same bearing | 2.5 |
| 6 | 18 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 3 | 4 | 5 | 2.5 |
| 18 | 30 | 0 | -5 | 0 | -5 | 5 | 4 | 2.5 | 4 | 4 | 5 | 2.5 |
| 30 | 50 | 0 | -6 | 0 | -6 | 6 | 5 | 3 | 5 | 4 | 5 | 2.5 |
| 50 | 80 | 0 | -7 | 0 | -7 | 7 | 5 | 3.5 | 5 | 4 | 5 | 3 |
| 80 | 120 | 0 | -8 | 0 | -8 | 8 | 6 | 4 | 6 | 5 | 6 | 4 |
| 120 | 150 | 0 | -9 | 0 | -9 | 9 | 7 | 5 | 7 | 5 | 7 | 5 |
